Server ML110 Gen11 4510 2x32GB 2x480GB SSD MR408i-o 2x1000W RPS EU P71659-425
26-924519
Main info
| Model | HPE ProLiant ML110 Gen11 |
| Chipset type | Intel C741 |
| Number of CPUs installed | 1 |
| Max supported number of processors | 1 |
| CPU series | Intel Xeon |
| CPU model | 4510 |
| CPU frequency | 2.4 |
| Number of cores | 12C |
| CPU - other information | Intel Xeon Silver 4510 |
| RAM memory installed | 64 |
| Max memory size | 1.5 |
| Memory type | DDR5 |
| Kind of memory | ECC |
| Kind of memory | Registered |
| Number of memory slots used | 2 |
| Number of available memory slots | 14 |
| Total number of memory slots | 16 |
| RAM - other information | 2 x HPE 32GB (1x32GB) Dual Rank x8 DDR5-5600 CAS-46-45-45 EC8 Registered Smart Memory Kit |
| Network interface | 2 x 10/100/1000 Mbit/s |
| Network card - other information | Embedded 2-Port 1GbE BCM5720 networking ports |
| Disk controller | Card |
| RAID levels | 60 (6+0) |
| RAID levels | 50 (5+0) |
| RAID levels | 6 |
| RAID levels | 10 (1+0) |
| RAID levels | 5 |
| RAID levels | 1 |
| Controller - other information | HPE MR408i-o Gen11 x8 Lanes 4GB Cache OCP SPDM Storage Controller |
| Form factor (width) | 2,5'' (SFF) |
| Hot-swapping support | Yes |
| Hard drive cage interfaces | SAS |
| Hard drive cage interfaces | SATA |
| Max. number of disks in current configuration | 8 |
| Number of HDDs installed | 2 |
| Total capacity of all disks installed | 960 |
| Type of installed disc | SSD |
| Disk interface | SATA |
| Optical disk drive | None |
| Internal backup device support | RDX |
| Internal backup device support | LTO |
| Internal backup device support | Yes |
| Expansion slots | 2 x PCIe 5.0 x16 |
| I/O connectors | 1 x 15-pin D-Sub |
| I/O connectors | 1 x DisplayPort |
| I/O connectors | 1 x USB 2.0 |
| I/O connectors | 1 x USB Service |
| I/O connectors | 2 x RJ-45 LAN |
| I/O connectors | 1 x RJ-45 (iLO Remote Management Network) |
| I/O connectors | 4 x USB 3.0 |
| Number of power supplies installed | 2 |
| Max. number of power supplies | 2 |
| Power supply output current | 1000 |
| PSU efficiency | 96 |
| Hot-plug power supply support | Yes |
| Number of fans | 2 |
| Hot-plug fans support | No |
| Housing | Tower |
| Height | 46.2 |
| Width | 19.5 |
| Depth | 58.7 |
| Weight | 30.3 |
| Tower to rack conversion support | Yes |
| Color | Black |
| Memory frequency | 5600 MHz |
| Designation |
Dimensions and weights
Product codes
Manufacturer
Photopoint offers free shipping for orders over 99 € delivered to Estonia. Take a look in the tab "Delivery" for a more precise delivery estimate.
For this product you can select the desired delivery method at the shopping cart:
Photopoint store Pick-up
Place your order from Photopoint web store and pick your goods up from one of Photopoint`s brick and mortar stores. The delivery to Photopoint store is free even for orders less than 99 €. You will be noticed by e-mail when your order is ready for pick-up.
The Photopoint stores are located in Tallinn and Tartu. See the exact locations from here.
Omniva parcel terminal
You can order the goods to one of the Omniva Parcel terminals. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. It is as simple as that.
See Omniva Parcel terminal locations here.
SmartPOST parcel terminal
Did not find an Omniva terminal at suitable location? Try SmartPost. Choose the desired terminal at the shopping cart. As the shipment arrives to the selected terminal, you will be sent an SMS-notification with an unique code. Go to the terminal within a week, enter the code and take your package. This method actually works for all parcel terminals.
See SmartPOST parcel terminal locations here.
DPD parcel locker
Make sure you check out also the locations of DPD parcel lockers. These are located all over Estonia. The delivery is the same. As the shipment arrives to the selected locker, you will be sent an SMS with a unique code. Go to the locker, enter the code and take your package.
See DPD parcel locker locations here.
Smartpost Finland parcel terminal
SmartPOST Finland is the best way to order goods to Finland. These terminals work the same way as in Estonia. As the shipment arrives to the selected terminal in Finland, you will be sent an SMS-notification with an unique code. Go to the terminal, enter the code and take your package.
See SmartPOST Finland parcel terminal locations here.
Matkahuolto parcel service
Matkahuolto is easy way to order goods to Finland. These are located also in smaller Finnish towns. As the shipment arrives to the selected Matkahuolto outlet, you will be sent an SMS-notification or an e-mail. Go to the outlet, show your ID and take your package.
See Matkahuolto outlet locations here.
Omniva courier delivery
The courier will transport your goods from Photopoint straight to the provided address. The delivery will take place at workdays from 08:00 to 17:00. Hold your phone near you as the courier will call you prior to its arrival. Please make sure there is someone at the destination, eligible to receive the shipment.
The product can only be ordered from our online store and it takes from 7-10 working days for delivery within Estonia.